How to install LED strip lights?
LED strip lights are one of the most versatile lighting fixtures and can be used in a variety of ways. LED light strips are easy to install. Just cut the strip of the right size, remove the tape, and press it into place. But it is not easy to install it safely, beautifully, and durable. This article will show you how to install LED light strips. So, without further ado, let’s get started.
1. Material preparation
(1) 24V/12V DC led strip lights: Choose the right light strip, measure the required installation size when installing, cut the light strip, and mark the cutting position for each light strip. Weihui’s cob led strip lights recommendation.
(2) Power adapter/driver power supply: The selected adapter should match the voltage and power of the light strip. It should be noted that when the light strip size exceeds 10 meters, the voltage at the end of the light strip will drop and become dim.
(3) Terminal blocks, soldering: Terminal blocks provide you with a quick and simple solution to reconnect the LED light strip, but for a more stable connection, I recommend soldering.
(4) Accessories: adhesive, aluminum profile, clip, lampshade: select suitable accessories according to the installation location, installation requirements and installation method.
(5) Controller (optional items, such as led dimmer control, remote control): used to control the light strip
(6) Switch (optional): used to control the light strip, Weihui’s sensor switch recommended.
2. Installation steps
(1) Measure the size and cut the light strip: measure the size of the required light strip and cut it at the cutting line at the mark. Only cut at the mark, otherwise the circuit will be damaged.
(2) Connect the power supply: make sure that the power supply output voltage matches the light strip (for example, a 12V led strip lights can only use a 12V power supply).
(3) Fix the light strip: use adhesive or clips to fix the light strip, or install it in the aluminum profile groove, which is firm and has better heat dissipation.
(4) Connect the controller or switch: if dimming, remote control or timing control is required, you can install an intelligent controller.
(5) Power-on test: after confirming that the connection is correct, turn on the power and check whether the entire section is lit. The installation is complete.
The following focuses on the installation methods of led strip lights:
3. Installation methods of LED light strips
(3) Clip installation:
The led strip is fixed with a clip and installed on the surface. Clip installation is a more stable installation method than adhesive installation. This process requires drilling, clips, screws, etc. There are many different types of clips on the market, such as: LED single-sided fixing clip, adhesive led strip lamp fixing clip, adjustable angle light strip fixing clip, E-type fixing clip. The advantage of fixing clip installation is that it is more stable and easy to manage. However, there are some disadvantages: screw installation is time-consuming and damages the wall.
①LED single-sided fixing clip:
When using these single-sided fixing clips to install LED light strips, the bracket-shaped structure of the clip fixes the light strip, and one side is fixed with screws. It is more secure than simple adhesive installation, will not fall easily, and is also convenient for maintenance.
②Adhesive light strip fixing clip:
Adhesive light strip fixing clip can fix strip lights or cables firmly, which is convenient for later maintenance. At the same time, you can choose to fix them with screws to add a second layer of protection and make the fixation more secure.
③Adjustable angle light strip fixing clip:
Using adjustable angle light strip fixing clips to fix LED light strips, you can adjust the beam angle of smart led strip, which is more powerful and more stable with screw fixing.
④E-type fixing clips:
E-type fixing clips can be made of aluminum metal or plastic. They are more suitable for thick light strips such as silicone LED light strips or neon light strips. These E-type fixing clips do not need to wrap the light strip and are directly fixed to the surface, creating a seamless lighting effect.
Different installation methods have different advantages and disadvantages. Fully understanding the installation methods of LED light strips can save you time. Learn about the different installation methods and choose the most suitable one to install your project to achieving the optimal solution for your project.